Titebond Speed Set Wood Glue is an extremely fast-setting, high solids PVA adhesive. It provides exceptional gap filling properties developing a bond stronger than the wood itself. This product offers excellent sandability, unaffected by finishes, and increases productivity through its shorter clamp time with no increase in viscosity. Titebond Speed Set is non-toxic and cleans up with water.

• Application Temperature: Above 15°C
• Duration during which you can manipulate and assemble the glued parts before the adhesive fully cures or sets: 2-4 minutes (21°C @ 50% relative humidity)
• Total assembly time: 8-10 minutes (21°C @ 50% relative humidity)
• Required clamping pressure: Use only enough pressure to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).
• Method of application: Any method can be used for spreading as long as total assembly times are met (see above).
• Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess glue.
• Limitations: Titebond Speed Set Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 15°C. Do not Freeze. Agitate adhesive monthly to reduce product settling. Adhesive is extremely fast setting. It is important to follow Assembly Time recommendations. Minimum clamp-time is 15 minutes. Longer clamp times may be beneficial. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
• Type: Aliphatic resin emulsion
• Calculated volatile organic compounds: < 6 g/L
• State: Liquid emulsion
• Color: White
• Dried film: Translucent
• Flashpoint: > 93.3°C
• Solids: 60%
• Viscosity: 3600 cps
• PH: 4.7
• Optimal temperature: To assure a good bond, 15°C is the lowest recommended temperature of the glue, air and materials during application.
• Storage life: 24 months in tightly closed containers around 23.8°C. For best results, mix glue every 30 days to reduce settling.